This document is the owner's manual for a Coleman spa, model 90467E, with electrical specifications of 110-120V~60Hz, 12A at 68°F (20°C). The manual provides comprehensive instructions for installation, usage, maintenance, troubleshooting, and safety.
Function Description:
The Coleman spa is an inflatable or drop-stitch portable spa designed for water recreation and relaxation. It features a heating system, a massage system (AirJet), and a filtration system to maintain water quality. Some models are equipped with Wi-Fi connectivity for remote control. The spa is designed for both indoor and outdoor use, with specific considerations for each environment.
Important Technical Specifications:
- Model: 90467E
- Electrical Rating: 110-120V~60Hz, 12A at 68°F (20°C)
- Water Temperature Range: 20°C (68°F) to 40°C (104°F)
- Default Temperature: 35°C (95°F)
- Power Rate:
- Massage Tube Blower: 6.5A
- Heat Element: 11.3A at 20°C
- Water Pump: 0.7A
- SOFA (Suction Outlet Fitting Assembly) Cover Flow Rating: 20 GPM
- SOFA Cover Life Expectancy: 3 Years
- Recommended Water Chemistry:
- pH: 7.4-7.6
- Total Alkalinity: 80-120ppm
- Free Chlorine: 2-4ppm
- Wi-Fi Connectivity: Available on specific models (S100105 / S100205) for remote control via an app. Supports 2.4GHz networks only.
- Freeze Shield™ System: Automatically maintains water temperature between 6°C (42.8°F) and 10°C (50°F) to prevent freezing in cold outdoor conditions (below 6°C/42.8°F).
Usage Features:
- Control Panel: Equipped with buttons for:
- LOCK/UNLOCK: 5-minute auto-lock feature, press for 3 seconds to lock/unlock.
- POWER-SAVING TIMER: Allows setting heating duration (1-999 hours) and a waiting time (0-999 hours) before heating activates.
- HEAT BUTTON: Activates the heating system. Red light indicates heating, green light indicates set temperature reached. Filtration system automatically starts with heating.
- MASSAGE SYSTEM BUTTON: Activates the AirJet massage system with a 30-minute auto-shutoff feature. Red light indicates activation. Can be used simultaneously with heating.
- TEMPERATURE ADJUSTMENT BUTTONS: Adjusts water temperature between 20°C (68°F) and 40°C (104°F).
- ON/OFF BUTTON: Activates/deactivates the control panel.
- CELSIUS/FAHRENHEIT TOGGLE: Switches temperature display units.
- WATER FILTER BUTTON: Turns the filter pump on and off. Red light indicates activation.
- Wi-Fi Activation (for equipped models): Instructions provided in a separate leaflet. Allows remote control of spa functions.
- Winter Use Instructions:
- Recommended to unfold and inflate the spa indoors if ambient temperature is below 15°C (59°F).
- Water used to fill the spa must be above 6°C (42.8°F).
- The Freeze Shield™ system should be active when outdoor temperatures are below 6°C (42.8°F) to prevent freezing.
- Spa should not be used when ambient temperature reaches -10°C (14°F).
- Safety Precautions:
- GFCI (Ground-Fault Circuit-Interrupter) must be tested before each use.
- Water temperature should not exceed 40°C (104°F).
- Pregnant women and young children should limit spa use and lower temperatures.
- Avoid alcohol, drugs, or medication before/during spa use due to drowning risk.
- Consult a physician if obese, have heart disease, blood pressure issues, circulatory problems, diabetes, or are on medication.
- Do not use during storms.
- Always attach a spa cover after each use to prevent unauthorized access by children and minimize heat loss.
- Never add water hotter than 40°C (104°F) to the spa.
- Do not use the spa alone.
- Enter and exit slowly and cautiously.
- Spa must be filled with water before operating the pump.
- Immediately leave the spa if feeling uncomfortable or sleepy.
Maintenance Features:
- Liner: Normal for liner to appear to lose air due to ambient temperature changes. Block air pipe and install stoppers on debris screens when detaching pump.
- Cover: Clean inside and outside periodically with gentle detergent.
- Filter Cartridge: Check and clean daily. Replace weekly or when soiled/discolored after washing.
- Water Quality:
- Regular cleaning of spa surfaces is necessary to prevent bacterial, algal, or fungal growth.
- Change water completely and clean/disinfect the spa regularly, especially if no chemical treatment is used (every 3 days).
- Use pool chemicals (chlorine or bromine tablets with a dispenser) to maintain water chemistry.
- Test water chemistry with a test kit (not included) regularly.
- Shower before using the spa to reduce cosmetic product residue.
- Do not throw chemical products directly into the water.
- Draining: Follow manual drawings for draining instructions.
- Drying: Ensure all parts (pump, liner chamber, massage chain, inflatable cover) are completely dry to prevent mildew and extend life.
- Cleaning: Use soap and water to clean spa walls; avoid hard brushes or abrasive cleaners.
- Deflating (for inflatable spas): Use deflation function to remove air for easier packing and storage.
- Repairing:
- PVC Material: Use provided PVC repair patch. Clean area, peel patch, press over damaged area, wait 30 seconds before inflation.
- Duraplus™ PVC Material: Use provided PVC patch and glue (not included). Clean and dry area, cut patch to size, apply glue, wait 30 seconds, place patch over damaged area, press firmly for two minutes, wait 30 minutes before inflation.
- Storage:
- Remove all accessories.
- Ensure spa liner, inflatable cover, pump, and accessories are completely clean and dry.
- Fold spa liner only if ambient temperature is above 10°C (50°F).
- Store in a dry place with a moderate temperature between 10°C (50°F) and 38°C (100°F).
- Recommend positioning liner and inflatable cover inside a carton box for winter protection.
To Next Page
Need help?
General
