3. Install rear brush guard
support (C). On top of
brush guard use bolts (1) and
concave washers (4). On bot-
tom of brush guard use bolts (2)
C
(2)
(1)
(4)
4. Tighten all bolts once brush
guard is installed.
(1)
(4)
(3)
5. Install front bumper.
On top of bumper use bolts (1)
Concave washers (4) and lock
nuts (3) On bottom of bumper
use bolts (2).
Bumper
(2)
BRUSH GUARD, BUMPER (CONT.)
6. Tighten all bolts once
bumper is installed.
5
To Next Page
Loading...
