Coleman CT100U - User Manual

WARNING
Never attempt to start this Mini Bike without reading and
understanding the Owner’s/Operator’s manual. The Owner’s/
Operator’s manual provides information on safety, parts,
functions, pre-ride inspection, starting and maintenance.
!
ASSEMBLY/PRE-RIDE INSPECTION
INSTRUCTIONS
CAUTION
This mini bike was
shipped without engine
oil. Always fill with with
the correct amount and
grade of engine oil as
listed in the owner's
manual.
CT100U
051816
For questions about these Assembly Instructions, call Coleman
Powersports toll free 888-405-8725

Summary

FRONT FORK INSTALLATION

Install front Fork Assembly

Install front fork assembly using the 10mm steering bolt, washers, and lock nut in specified order.

FRONT WHEEL INSTALLATION

Orient tire and install axle bolt

Orient front tire with arrow forward, then insert axle bolt with washers through forks and wheel.

OIL AND FUEL

Engine Oil Filling

Fill the engine crankcase with SAE 10W-30 oil to the brim of the fill hole (.63qt/0.6L).

TIRE PRESSURE AND CHAIN TENSION

BRAKE ADJUSTMENT

Brake Lever Free Play Adjustment

Rear Brake Adjustment

THROTTLE ADJUSTMENT

Idle Speed Adjustment

Throttle Cable Free Play Adjustment

PRE-RIDE INSPECTION

Pre-Ride Checklist Items

Perform pre-ride checks on steering, brakes, tires, fuel, throttle, engine stop switch, oil, chain, and general condition.

STARTING ENGINE

Starting Procedure

Follow steps: fuel valve ON, cold choke ON (if needed), ON/OFF switch ON, pull starter cord, then set choke to OFF when warm.

Coleman CT100U Specifications

General

Engine Displacement	98cc
Frame	Steel
Brakes	Rear Drum Brake
Tires	Knobby
Engine Type	4-stroke, single-cylinder
Transmission	Automatic
Starting System	Recoil Start