TECHNICAL GUIDE
ECHELON
TM
SERIES
SPLIT-SYSTEM HEAT PUMPS
16 SEER – R-410A – 1 PHASE
2 THRU 5 NOMINAL TONS
MODELS: HC6B024 THRU 060
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.colemanac.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Extended 10-Years limited parts warranty.
Extended Lifetime limited compressor warranty.
Extended parts and compressor warranties require online
registration within 90 days of purchase for replacement or
closing for new home construction.
* Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
632152-CTG-E-0812
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 16 SEER Series unit is the outdoor part of a versatile climate
system. It is designed with a matching indoor coil component from
Johnson Controls Unitary Products. Available for typical applica-
tions, this climate system is supported with accessories and docu-
ments to serve specific functions.
FEATURES
• Superior Coil Protection - A stamped, decorative metal coil
guard protects the tube-in-fin coil from debris and other damag-
ing material.
• Protected Compressor - The compressor is safeguarded
against abnormal pressures and temperatures by an internal
pressure relief valve, an internal temperature sensor, and fac-
tory high and low pressure system controls. A factory installed
liquid line filter-drier further protects the compressor against
moisture and debris.
• Environmentally Friendly Refrigerant - The next generation
refrigerant R-410A delivers environmentally friendly perfor-
mance with zero ozone depletion.
• Durable Finish - An automotive quality finish provides the ulti-
mate protection from harmful UV rays and rust creep, ensuring
a long-lasting, high quality appearance. A powder-paint topcoat
is applied over a baked-on primer using a galvanized, zinc
coated steel base material. The result is a finish that has been
proven in testing to provide 33% greater durability than conven-
tional powder-coat finishes.
• Hot Heat Pump - An optional mode that slows the indoor fan
for higher register air temperatures and premium comfort.
• WhisperDrive™ System - Features combination of swept-
wing fan, composite base pan, isolated compressor compart-
ment, and single-stage compressor to reduce overall sound to
a mere whisper. The 5-ton system utilizes a two-stage com-
pressor.
• Low RPM Fan Motor - Helps to reduce airflow noise.
• Swept Wing Fan - A fan design boasting technology adapted
from aeronautic and defense engineering provides for whisper-
quiet operation by allowing air to flow smoothly and efficiently
across the fan tips.
• Composite Base Pan - The strong and durable composite
base pan provides added strength while resisting rust and cor-
rosion, as well as reducing sound and vibration.
• Isolated Compressor Compartment - A molded composite
bulkhead isolates the refrigeration components and the com-
pressor from the rest of the unit, reducing sound and vibration.
• Lower Installed Cost - Designed to provide enhanced instal-
lability by featuring a slide-down control compartment that
allows easy access to control components, along with angled
service valves to reduce overall installation time and cost. Fac-
tory charged for a 15 foot lineset.
• Factory Installed Filter-Drier - A factory installed, solid core
liquid line filter-drier removes harmful debris and moisture from
the system.
• Easy Service Access - A full end, full service access panel
with handle makes for easy entry to internal components.
• Communications Capable - Requiring only a simple 4-wire
installation, the communicating capability enables the use of
the Touch Screen Communicating Control, allowing real time
visibility of system operation and the use of diagnostic features,
while still maintaining the ability to function with a traditional
thermostat.
• Complete System Control - These heat pumps utilize a
unique microprocessor defrost control system to provide opti-
mal comfort as well as monitor the overall system for reliable
operation. In the event improper operating conditions occur
(high temperature and/or high pressure), the system will auto-
matically shut the system down to extend the life of the heat
pump. The defrost control features an internal memory to aid
the technician in troubleshooting, reducing service time and
cost.
• Premium System Warranty* - Limited lifetime compressor
warranty when registered online within 90 days of installation.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240 in
accordance with the Unitary Small Equipment certification pro-
gram.
To Next Page
Need help?
General
