Coleman HC8B024F1 - User Manual

TECHNICAL GUIDE
Echelon
SPLIT-SYSTEM HEAT PUMPS
18 SEER – R-410A
MODELS:
HC8B024 THRU 060
(2 THRU 5 NOMINAL TONS)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ari.org/aridirectory
ISO 9001
Certified Quality
Management System
LISTED
345095-CTG-B-0907
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The HC8BSeries unit is the outdoor part of a versatile heat pump
system. It is designed to be custom matched with one of our
complete line of evaporator sections, each designed to serve a
specific function. Matching air handlers are available for upflow,
downflow, and horizontal left or right application to provide a
complete system. Electric heaters are available if required. Add-
on coils are available for use with upflow, downflow, or horizontal
furnaces. Field installed accessories are available as needed.
WARRANTY
5-year limited parts warranty.
10-year limited compressor warranty.
Premium System Warranty - Limited lifetime compressor and 10-
year parts when matched with an approved Coleman Echelon
furnace or UPG air handler and coil.
FEATURES
• Superior Coil Protection – A PVC coated steel coil guard com-
pletely protects coil from debris and other large damaging material
while a polymer mesh further protects the coil against smaller par-
ticles.
• Isolated Compressor Compartment – A molded composite
bulkhead isolates the compressor from the rest of the unit reduc-
ing sound and vibration.
• Protected Compressors – Each compressor is protected against
high and low pressure as well as excessive temperature. This is
accomplished by by the simultaneous operation of a high pres-
sure relief valve and temperature sensors which protect the com-
pressor if undesirable conditions occur.
• Environmentally Friendly Refrigerant – Next generation refrig-
erant R-410A delivers environmentally friendly performance, with
zero ozone depletion.
• Durable Finish – Automotive quality finish provides the ultimate
protection from harmful U.V. rays as well as rust creep ensuring
long-lasting high quality appearance. A powder-paint topcoat is
applied over a baked-on primer, using a galvanized, zinc coated
steel base material. The result is a finish that has been proven in
testing to provide 33% greater durability than conventional pow-
der-coat finishes.
• Lower Installed Cost – Designed to provide enhanced installabil-
ity by featuring a slide-down control compartment allowing easy
access to control components along with angled service valves to
reduce overall installation time and cost.
• Low Operating Sound Levels – A fan design boasting technol-
ogy adapted from aeronautic and defense engineering provides
for whisper quiet operation by allowing airflow to flow smoothly
and efficiently across the fan tips.
• Filter-Drier – A factory installed, solid core liquid line filter-drier fil-
ters harmful debris and moisture from the system.
• Easy Service Access – A full end, full service, access panel with
handle makes for easy entry to internal components.
• Long Lasting Operation – Strong and durable composite base
pan provides added strength while resisting rust and corrosion as
well as reducing sound and vibration.
• WhisperDrive
TM
system - The swept-wing fan, composite base
pan, isolated compressor compartment and two-stage compres-
sor are engineered as a system to reduce overall sound to a mere
whisper.
• Complete System Control – All models utilize the exclusive
microprocessor based, on-demand, defrost control system. This
system provides optimal comfort, efficiency, and constant montor-
ing of the entire system for reliable operation. defrost cycles occur
only when necessary. an adjustable balance point insures supple-
mental heat is brought on only when required to meet the space
load, for optimum efficiency and reliability.
• In the event improper operating conditions occur (high tempera-
ture and/or high pressure), the unit will automatically shut down to
protect the refrigeration system, and switch to back-up heat. On-
board diagnostic LED’s guide the technician to the source of the
problem, and an output signal from the control to the thermostat
will alert the homeowner. The control also features non-volatile
memory, which preserves trouble codes in the event of power
loss. An anti-short cycle timer extends the life of the compressor
by preventing short-cycling.
Certified in accordance with the Unitary Small Equipment certification
program, which is based on ARI Standard 210/240.

Summary

Coleman Features

Superior Coil Protection

Protects coil from debris using PVC coating and polymer mesh for damage prevention.

Isolated Compressor Compartment

Molded bulkhead isolates compressor, reducing sound and vibration for quieter operation.

Protected Compressors

Compressor protection against high/low pressure and excessive temperature for enhanced reliability.

Environmentally Friendly Refrigerant

Uses R-410A refrigerant for environmentally friendly performance with zero ozone depletion.

Durable Finish

Automotive quality finish provides protection from UV rays and rust creep for longevity.

Lower Installed Cost

Slide-down control compartment for easy access, reducing installation time and overall cost.

Low Operating Sound Levels

Fan design adapted from aeronautics for whisper quiet operation and efficient airflow.

Filter-Drier

Factory installed liquid line filter-drier removes harmful debris and moisture from the system.

Easy Service Access

Full end access panel with handle for easy entry to internal components for maintenance.

Long Lasting Operation

Durable composite base pan resists rust, corrosion, and reduces sound for extended life.

WhisperDriveTM system

Engineered system for reduced sound, including fan, base pan, and compressor for quietness.

Complete System Control

Microprocessor-based, on-demand defrost control for optimal comfort, efficiency, and monitoring.

Physical and Electrical Data

Additional R-410 A Charge; TXV Size for Various Matched Systems

Cooling Capacity - With Air Handler Coils

Cooling Capacity - With Variable Speed Furnaces

Heating Capacity - With Air Handler

Heating Capacity - With Variable Speed Furnaces

Accessories

TXV Kits

1TVM9 series thermal expansion valves for precise refrigerant metering and optimum performance.

Bonnet Sensor

Senses plenum temperature; optional with gas/oil back-up heat for precise control.

Dehumidistat

Increases dehumidification when matched with variable speed furnace or air handler for better comfort.

Heat Pump Risers

3, 6, or 12 inch risers mount in base pan recesses for unit clearance from snow and ice.

Room Thermostats

Wide selection of thermostats available for various installation features and user preferences.

Sound Power Ratings

Cooling Performance Data - Low CFM 1-Stage Operation

Cooling Performance Data - High CFM 2-Stage Operation

Heating Performance Data - Low CFM 1-Stage Operation

Heating Performance Data - High CFM 2-Stage Operation

Notes

Coleman HC8B024F1 Specifications

General

Brand	Coleman
Model	HC8B024F1
Type	Heat Pump
Cooling Capacity (BTU)	24000
Heating Capacity (BTU)	24000
SEER	14
HSPF	8.2
SEER Rating	14
HSPF Rating	8.2
Voltage (V)	208/230
Phase	1
Refrigerant Type	R-410A
Sound Level (dB)	72