To Next PageTo Next Page
Need help?Do you have a question about the Coleman Power Steel 13382 and is the answer not in the manual?
General| Brand | Coleman |
|---|---|
| Model | Power Steel 13382 |
| Category | Swimming Pool |
| Language | English |
Access Spanish instructions at bestwaycorp.com/support.
Add 1-2 inches of water to smooth out wrinkles on the pool floor.
Avoid soft lawn assembly; use timber boards under supports to spread the load.
Closely supervise children in or near the pool to prevent drowning.
Keep electrical devices away from the pool and avoid overhead lines.
Do not use pool if drain or suction outlet covers are missing or broken.
Install barriers and remove items that allow children to climb into the pool.
Keep a phone and emergency numbers nearby; be CPR certified.
Requirements for pool barriers including height, openings, and gates.
Follow rules regarding diving, supervision, alcohol, and roughhousing.
Barriers must prevent climbing and comply with regulations.
Secure ladders and steps when the pool is not in use.
Ensure the surface supports the pool's weight and is flat and smooth.
Avoid locations with overhead power lines, trees, or underground utilities.
Use grass, concrete; avoid mud, sand, gravel, and soft soil.
List of various top rails and connectors with part codes.
List of U-supports and pool liners with part codes.
Familiarize yourself with parts before assembly.
Follow assembly steps, prepare pool for setup, and connect to drainage.
Fill pool to welding line, do not overfill, and check for levelness.
Check pool for any leaks at valves or seams after filling.
Maintain water chemistry using test kits and recommended values.
Use underwater adhesive repair patch for leaks.
Properly drain, dry, and store the pool and accessories.
