This rechargeable pump needs to be charged for 10 HOURS (but no more than 24 hours) before first use.
Charge only using transformer provided with the pump.
Do not leave pump charging for more than 24 hours to avoid damage to the battery.
After use, recharge pump within 48 hours.
Always store pump with a full charge. To keep the battery at optimum operating levels, recharge the unit every 3
months, even if it has not been used.
Pump will not operate when charger is plugged in.
Inflating Coleman® Double Lock™ Valve
1. To begin inflation, open external cap and pull firmly on the lanyard to extend out. This will open internal yellow
seal. (Fig. 1)
2. Attach adapter nozzle to inflation end of pump. Insert pump and turn on. (Fig. 2)
Note: The pump may look different from yours. It is for illustration purposes only.
3. When fully inflated, seal valve by pushing in with pump nozzle. This will seal the internal yellow stopper and
keep air from escaping while closing cap. Gently twist adapter sleeve to right while backing pump out of valve.
(Fig. 3)
To Next Page
Loading...
Need help?
General
