Need help?Do you have a question about the Coleman Roto Spa and is the answer not in the manual?
Discusses dangers of prolonged exposure to hot air or water and symptoms of hyperthermia.
Guidance on selecting the optimal placement for your spa, considering safety and environment.
Information on ensuring a stable and appropriate foundation to prevent damage and maintain warranty.
Details for installing a 110V/60Hz spa, including GFCI requirements and cord specifications.
Step-by-step guide on how to test the Ground Fault Circuit Interrupter for safety.
Specifies GFCI and wiring requirements for 30-amp and 50-amp power modes.
Details on RCD requirements and wiring for 50Hz systems, including single and dual service options.
Guide to using the spa's control panel, including initial start-up and priming.
Instructions on how to adjust and display the spa's water temperature settings.
Explanation of the Standard, Economy, and Sleep heating modes for efficient operation.
How to control the spa's jets, including low speed, high speed, and turning them off.
Instructions for turning the spa's light on and off, including optional lighting.
Guide to programming the spa's filtration cycles for optimal water circulation and cleaning.
Emphasizes the importance of a consistent maintenance schedule for clear spa water.
Explains how regular filter cleaning is crucial for water clarity and equipment function.
Details on using sanitizers like chlorine or bromine to keep spa water clean and safe.
Explains the need to test and adjust chemical balance, including alkalinity, hardness, and pH.
Procedure for shocking spa water to remove contaminants and improve sanitizer effectiveness.
Critical safety instructions regarding the handling, storage, and use of spa chemicals.
Information on how the ozonator works and its role in water treatment.
Explains how the number of users and usage frequency impact spa water maintenance.
Instructions for using granulated chlorine as a spa sanitizer, including application and testing.
Instructions for using bromine as a spa sanitizer, including base setup and tablet use.
Detailed steps for cleaning spa filters to maintain optimal performance and prevent issues.
Procedure for filling the spa with fresh water and initial chemical balancing.
Steps for safely removing the spa's access panel for maintenance and draining.
Recommended method for draining the spa every four to six months.
Guide for installing latches to secure the spa cover, including necessary tools and steps.
Information on filter maintenance and replacement for optimal water clarity and heating efficiency.
Advice on cleaning the spa cover and shell, recommending specific products.
Details on how to adjust the water flow of the spa's adjustable jets for personalized massage.
Procedure for tightening the fixed jet bodies to maintain their position and prevent leaks.
Catalog of available replacement parts for the spa, including jet inserts, bodies, gaskets, and tools.
Part number for the ozone injector or cluster unit.
List of various spa light components, including mini diameter and LED options.
Part numbers for 1.5 BHP and 5.0 BHP two-speed pumps.
Replacement parts for the control panel, including the panel itself and overlays.
Part number for the VS300 control box.
Part number for the VS300 circuit board.
Part number for the 15-foot GFCI plug and cord.
Part number for the ozonator unit.
Part number for the spa sensor.
Part numbers for spa cover lock and key sets for Cal and Ideal covers.
List of available spa covers by size and color (Slate and Hunter Green).
Part numbers for filter covers in Cinnabar, Dark Twilight, and Sahara colors.
Part numbers for 7-foot spa panels, including rock panel options.
Part numbers for round roto mold door panels in Cinnabar, Dark Twilight, and Sahara colors.
Solutions for common spa heating issues such as no heat, slow heating, or overheating.
Solutions for problems like jets surging, weak jets, or water leakage from below the spa.
Resolving issues related to no airstream from jets or jet spout problems.
Guides for fixing issues with the spa light not working, such as burned-out bulbs.
Warranty coverage for the spa's cabinet structure against rot, cracking, or peeling.
Warranty coverage for the spa's plumbing against leaks due to material or workmanship defects.
Warranty coverage for electrical and electronic components, control system, and pumps.
Warranty coverage for manufacturer-installed ozonator and LED light source.
Information on the warranty for the spa cover, typically provided by the cover manufacturer.
Details on obtaining service and repairs from authorized selling dealers.
Information on shipping costs, labor charges, and service agent fees for warranty claims.
Explanation of how non-repairable units are replaced on a prorated basis.
Instructions and steps for registering your new spa online for product alerts and support.
Guidance on finding the spa's serial number and other registration details.
To Next Page
General