Coleman SaluSpa 90427E User Manual (English)

Questions and Answers:

C
Catherine MillerAug 13, 2025
Why is my Coleman SaluSpa 90427E pump not heating properly?
- R
  Rebecca KnoxAug 13, 2025
  Your Coleman Hot Tub pump may not be heating properly for several reasons. Ensure the temperature isn't set too low; if it is, set it to a higher temperature. Check if the filter cartridge is dirty and clean or replace it. Also, confirm the spa is covered. If the thermal cut-out has tripped, unplug the pump and let it cool until the water temperature reaches 35°C (95°F) or lower before restarting. If the heating element has failed or the fuse has cutout, contact your local Bestway After Sales service point to get instructions.
A
Andrea FryAug 17, 2025
What to do if Coleman Hot Tub control panel not working?
- J
  jonathanandersonAug 17, 2025
  If the control panel on your Coleman Hot Tub isn't working, it may be auto-locked after 5 minutes of inactivity. To unlock it, press the button for 3 seconds. If it remains locked, try restarting the pump by unplugging it and plugging it back in. If the control panel is not activated, press the on/off button for 2 seconds. If the problem persists, please contact your local Bestway Aftersales Service Center for instructions.
S
Spencer OconnellAug 21, 2025
How to fix Coleman SaluSpa 90427E Hot Tub spa pool leakage?
- N
  Nicholas JohnsonAug 21, 2025
  If your Coleman Hot Tub is leaking, check for tears or punctures and use the provided repair patch to fix them. Also, check if the air valve is loose by applying soapy water to see if air is escaping. If it is, deflate the spa, hold the backside of the air valve from inside the spa wall, and turn the wrench clockwise to tighten it.
A
Aimee OlsenAug 25, 2025
Why is the water in my Coleman SaluSpa 90427E not clean?
- Y
  Yolanda LopezAug 25, 2025
  If the water in your Coleman Hot Tub is not clean, you may need to increase the filtration time. Also, check the filter cartridge and clean or replace it. Refer to the chemical manufacturer’s instructions for proper water maintenance.
A
Aimee MartinezAug 28, 2025
What to do if Coleman SaluSpa 90427E massage system does not work?
- C
  Christian JonesAug 28, 2025
  If the massage system on your Coleman Hot Tub isn't working, the air pump may be overheating. Unplug the pump and wait two hours for it to cool down, then plug it back in and press the massage system button. If the massage system stops automatically, press the massage system button to reactivate it. If the air pump is broken, contact your local Bestway Aftersales Service Center for instructions.
F
Frank CrawfordSep 1, 2025
What to do if Coleman SaluSpa 90427E Hot Tub GFCI test failed?
- S
  Sara LeeSep 1, 2025
  If the GFCI test failed on your Coleman Hot Tub, it indicates a defect in your spa. Contact your local Bestway Aftersales Service Center and return the SPA.
M
martinezmarySep 5, 2025
How to fix Coleman SaluSpa 90427E pump adapters not level with the spa adapters?
- T
  Theodore SummersSep 5, 2025
  Since PVC can change shape, which is normal, elevate the pump with wood or another type of insulated material to bring the pump's adapters level with the spa's adapters.
A
Andrea MartinSep 8, 2025
What to do if water leaks from the adapters between the Coleman Hot Tub pump and spa?
- R
  russomarkSep 9, 2025
  Insert the three stopper caps onto the spa’s ports to prevent water from escaping and disconnect the pump. Check and make sure the seals are placed correctly inside the pump adapters. If the seals are missing or not installed correctly, please contact your local Bestway Aftersales Service Center for instructions. If the seals are correctly in place, reconnect the pump to the spa and hand-tighten the adapters.

Coleman SaluSpa 90427E Specifications

General

Brand	Coleman
Model	90427E
Type	Inflatable Hot Tub
Capacity	4-6 people
Water Capacity	254 gallons
Voltage	110-120V
Heat Output	104 degrees Fahrenheit
Air Jets	120
Pump	Included
Heater Wattage	1, 000 watts
Cover	Included
Included Components	Hot tub, cover, pump, filter