EasyManua.ls Logo

Coleman 90363E User Manual

Coleman 90363E
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
90363E
110-120V~ 60Hz, 12A at 68°F (20°C)
Coleman
OWNER’S MANUAL
DO NOT RETURN THIS ITEM TO THE STORE OR
WEBSITE WHERE IT WAS PURCHASED.
PLEASE VISIT BESTWAYCORP.COM/SUPPORT
FOR QUESTIONS, OR FOR DEFECTIVE OR
WARRANTY CLAIMS.
Para la instrucción en español,
visite bestwaycorp.com/support
Question and Answer IconNeed help?

Do you have a question about the Coleman 90363E and is the answer not in the manual?

Coleman 90363E Specifications

General IconGeneral
BrandColeman
Model90363E
CategoryHot Tub
LanguageEnglish

Summary

Important Safety Instructions

General Safety Warnings and Dangers

Covers electrical safety, drowning risks, injury prevention, and general hazards.

Water Temperature and Health Precautions

Details on safe water temperatures for adults, children, and pregnant women, plus measurement.

Further Safety Precautions

Health and Medication Advice

Advice on consulting physicians regarding health conditions and medication use.

Operational and Usage Cautions

Safety advice for using the spa in rain, with water, and general operational cautions.

Warning Label Summary

Reduce Risk of Electrocution

Key electrical safety points from the warning label.

Reduce Risk of Child Drowning

Key child safety points from the warning label.

Reduce Risk of Overheating

Key overheating and health risk points from the warning label.

Spa Suction Fitting Instructions

Suction Fitting Safety and Maintenance

Covers modifications, replacements, adhesives, and general care for suction fittings.

Winterizing Suction Fittings

Specific instructions for winter storage of suction fittings.

Selected Location

Indoor Installation Requirements

Special considerations for indoor spa placement and ventilation.

Outdoor Installation Considerations

Guidelines for outdoor placement near drains and sunlight exposure.

Pre-Setup Check List

Parts Verification

Instructions to check all equipment components before use for damage or missing parts.

Installation

General Installation Guidelines

Covers positioning, connecting heater, and filling with water during installation.

Winter Set-up Instructions

Specific procedures for setting up the spa in winter conditions.

GFCI Test Procedure

Testing the GFCI

Step-by-step guide to test the Ground Fault Circuit Interrupter before operation.

Important Usage Notes

Warnings and notes regarding extension leads, plug types, and inflation.

Using the Spa

Control Panel Button Functions

Explains Lock/Unlock, Power-Saving Timer, and Heat buttons on the control panel.

Spa Control Panel Features

Massage System and Filter Operation

Details on activating the massage system and operating the water filter.

Temperature and Unit Settings

How to adjust temperature and toggle between Celsius and Fahrenheit.

Winter Use Instructions

Freeze Shield System Operation

How the Freeze Shield system works to prevent freezing in winter.

Heating Duration Guidelines

Table showing heating duration based on ambient and water temperatures.

Maintenance

Adding Air and Cover Care

Instructions for maintaining air pressure and cleaning the spa cover.

Filter Cartridge Maintenance

Procedures for cleaning and replacing filter cartridges for water clarity.

Water Maintenance Introduction

General guidance on maintaining spa water cleanliness and chemical balance.

Water Chemistry and Chemical Use

Chemical Tablet and Liquid Usage

How to use chemical tablets and liquids for water treatment.

Recommended Water Chemistry

Optimal pH, alkalinity, and chlorine levels for spa water.

Disassembly and Storage

Draining the Spa

Step-by-step guide on how to drain the spa water.

Spa Cleaning and Repair

Cleaning and Deflation

Instructions for cleaning spa walls and deflating the spa for storage.

Repairing PVC Parts

Steps for repairing tears or punctures in the spa material using patches.

Troubleshooting Common Issues

Pump and Massage System Problems

Solutions for issues like pump not operating, heating, or massage system not working.

Water Quality and Control Panel Issues

Tips for resolving problems with water clarity and control panel functionality.

Leakage and GFCI Errors

Guidance for addressing water leaks from adapters and GFCI test failures.

Understanding Error Codes

Flow Sensor and Water Detection Errors

Explains error codes related to water flow sensors and detection.

Temperature and Connection Errors

Solutions for errors related to the thermometer and connection issues.

Thermal Cut-out and Other Errors

Information on thermal cut-out errors and other potential issues.

Related product manuals