What to do if the EMERGENCY STOP is activated on Collomix DYNAX 450 Laboratory Equipment?
If the EMERGENCY STOP is activated on your Collomix Laboratory Equipment, first release the EMERGENCY STOP. If the issue persists, check the switch and the power cord/plug of the EMERGENCY STOP button.
How to fix E010 'Door open' error on Collomix DYNAX 450 Laboratory Equipment?
If the Collomix Laboratory Equipment displays error E010 indicating the door is open, make sure to close the door properly. If the error continues, check the door lock and the power cord/plug to the door lock.
How to troubleshoot error E170 'Error door lock' on Collomix DYNAX 450?
If the Collomix Laboratory Equipment displays error E170 related to the door lock, check the door lock, the connection of the door lock, and the door motor.
What causes the 'Mixing Unit locked' error on Collomix DYNAX 450 Laboratory Equipment?
If the Collomix Laboratory Equipment displays error E070 indicating the mixing unit is locked, it may be due to a blocked latching pin. Clean and lubricate the pin, and replace it if necessary. Also, check the lead/connector to the switch of the mixing unit lock.
What should I do if the mixing unit is unlocked on Collomix DYNAX 450?
If the Collomix Laboratory Equipment displays error E080 indicating the mixing unit is unlocked, check the lead/connector to the switch of the latching pin and the lead/connector to the switch of the mixing unit lock, as the latching pin may be blocked.
What to do if Collomix DYNAX 450 shows error E050 'Defective container'?
If the Collomix Laboratory Equipment displays error E050 indicating a defective container, check the clamping pressure and adjust if necessary.
General| Voltage | 230 V |
|---|---|
| Speed | 100-450 rpm |
| Weight | 42 kg |
| Frequency | 50 Hz |
| Tool fitting | M14 |
Identifies and labels the physical parts of the DYNAX 450 mixer.
Details the controls, buttons, and display elements of the mixer's interface.
Explains the meaning of various symbols and signal words used for warnings and information.
Provides fundamental safety principles and general precautions for operating the machine.
Defines the specific materials and applications for which the biaxial mixer is designed.
Lists potential incorrect uses of the mixer that could pose hazards to users or the machine.
Specifies the required expertise and training for personnel operating the mixer.
Details critical safety features such as the closed housing, interlocked door, and emergency stop.
Identifies potential risks that remain even after all safety precautions have been taken.
Lists the items included with the biaxial mixer upon delivery.
Guides on unpacking, positioning, and preparing the mixer for initial use.
Explains how to use and adjust the machine's built-in transport rollers.
Details the procedure for safely connecting the mixer to the electrical power supply.
Instructions for installing and activating the automatic lubrication system.
Procedure for performing an initial test run to ensure proper machine function.
Steps to power up and initialize the biaxial mixer.
Instructions on how to correctly place and secure a mixing container in the machine.
How to initiate and commence the mixing process using the control buttons.
Procedures for stopping the mixing process, either automatically or manually.
Steps to follow for safely concluding operations and shutting down the machine.
Details the function and reset procedure for the emergency stop button.
Lists common error codes, their descriptions, machine conditions, and suggested solutions.
Detailed steps for resolving the 'E080 MU unlocked' error related to mixing unit positioning.
Procedure for manually unlocking the machine door in case of malfunction or power loss.
Details the location and replacement of device fuses for troubleshooting power and display issues.
Instructions for cleaning the machine's interior, exterior, and specific components.
Scheduled maintenance tasks, including daily, weekly, and semi-annual checks.
Information on when and how to contact customer service or the manufacturer for repairs.
Recommendations for storing the machine to prevent damage and corrosion.
Instructions for the correct disposal of the machine and its packaging materials.
Detailed technical data including power, dimensions, weight, and noise emissions.
Provides detailed visual representations and measurements of the machine's physical size.
Official declaration stating the product's compliance with relevant European directives and standards.
Information regarding the product warranty and how to access delivery terms and conditions.
To Next Page
