USB 3.1 Gen1 connectors
This connector is for USB 3.1 Gen1 devices.
USB 2.0 connectors
These connectors are for USB 2.0 ports. Connect the USB module cable to
any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with the USB 2.0
specification that supports up to 480Mbps connection speed.
35
Ｈａｒｄｗａｒｅ Ｉｎｓｔａｌｌａｔｉｏｎ
To Next Page
Loading...
