Need help?Do you have a question about the Colorful B365M-PLUS V21 and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Socket | LGA 1151 |
| Chipset | Intel B365 |
| Memory Slots | 4 |
| Max Memory | 64GB |
| Memory Standard | DDR4 2666/2400/2133 MHz |
| Video Outputs | 1 x HDMI, 1 x DVI-D, 1 x VGA |
| LAN | Realtek RTL8111H Gigabit LAN |
| CPU Support | Intel 8th/9th Gen Core i7/i5/i3/Pentium/Celeron Processors |
| Storage | 4 x SATA 6Gb/s |
| USB Ports | 6 x USB 2.0 |
| Audio | Realtek ALC662 6-Channel HD Audio |
| Power Connector | 24-pin ATX |
| PCIe Slots | 1 x PCIe 3.0 x16, 1 x PCIe 3.0 x1 |
Sets the waiting time for the screen prompt during startup. '65535' indicates indefinite wait.
Sets to enable or disable the quick start function. It skips some tests to reduce startup time.
Sets boot device priority. Used when installing an operating system from CD-ROM or USB drive.
Enables or disables Intel's power-saving technology to adjust CPU voltage and frequency.
Enables or disables Intel's CPU frequency adjustment technology. Options: Disabled, Enabled.
Enables or disables memory overclocking settings. If enabled, further options appear.
Sets memory timings and parameters. Options: Default Profile, Custom Profile, XMP Profile.
Sets the memory frequency. Options include various MHz values.
Controls CAS latency, determining the delay time for SDRAM to read after instruction.
Sets the number of memory clocks to control SDRAM timing parameters.
Sets the minimum RAS value controlling SDRAM memory cycles.
Sets the interval for row activation commands within the same rank.
Selects the automatic refresh cycle time for SDRAM.
Selects the delay time between columns of different banks.
Selects the precharge time for memory operations.
Saves current settings and restarts the system. Requires confirmation.
Detailed procedure for installing the CPU into the motherboard socket safely.
Instructions for mounting the CPU cooling fan assembly onto the motherboard.
Procedure for installing RAM modules into the motherboard's DIMM slots.
Steps to physically install the motherboard into the computer chassis.
Guide to connecting internal cables and setting switches on the motherboard.
Ensures the CPU is correctly and firmly installed in the socket for proper contact.
Secures the CPU by closing the load plate and engaging the socket lever.
Guidance on installing the CPU fan assembly, emphasizing correct orientation.
Illustrates correct CPU orientation and alignment with socket notches to prevent damage.
Guidance on populating DIMM slots for single, dual, or quad module configurations.
Procedure for inserting memory modules into DIMM slots, ensuring proper alignment and locking.
Procedure for mounting the motherboard onto chassis studs/spacers and securing with screws.
Step-by-step guide to correctly install an M.2 SSD into the motherboard slot.
Step-by-step instructions to clear CMOS by shorting pins 2-3 and repowering.
Sets the system administrator password following specific steps.
Sets an ordinary user password after the administrator password is set.
Sets memory timings. Options: Default Profile, XMP Profile1.
Sets the memory frequency for performance tuning.
Controls CAS latency, determining SDRAM read delay time.
Sets memory clocks to control SDRAM timing parameters.
Sets the minimum RAS value for SDRAM memory cycles.
Sets row activation intervals at the same time within a rank.
Selects the automatic refresh cycle time.
Selects delay time between columns of different banks.
Selects the precharge time.
Saves configuration and restarts the system. Requires confirmation.
To Next Page