mistake is entered when the password is confirmed, and reoperation is
required.
4. if you want to change the password of the system administrator,
please run the password settings again according to the above program.
5.press the "F10" key to save and exit, password settings can be effective.
User Password
After the administrator password is set up successfully, this option will appear
to set the ordinary user password. Select "User Password" item and press the
"Enter" key. The rest of the steps are the same as the administrator password
settings.
Note: the administrator password and user password: 1. Supervisor password:
can enter and modify the BIOS setup program. 2. User password: can enter,
but has no right to modify part of BIOS setup program. 3., if you forget to set
the BIOS password, you can clear the CMOS to solve it.
53
ＢＩＯＳ Ｓｅｔｔｉｎｇ
To Next Page
Loading...
