New Boot Option Policy(Setting up when the operating system is installed)
Boot device priority settings.If the user wants to install the operating system, please
set "Boot Option #1" as your drive device (CD-ROM) or your U disk device (provided
that your CD-ROM drive has an operating system or your U disk has an PE system),
When setup is complete, press the "F10" key to save and exit. The system will boot
from your drive or U disk.
5-3-8 C.Oclock（OverClock Settings）
Intel（R）SpeedStep（tm）
Turn on or off Enhanced Intel Energy Saving Technology. It is an intelligent
frequency reduction technology developed by Intel. It can automatically adjust
the voltage and frequency of the processor according to the workload of
different systems to reduce power consumption and calorific value. When
overclocking, this option needs to be set to "Disabled".Options: Enabled,
Disabled.
Turbo Mode
Turn on or off Turbo Mode.Options: Enabled, Disabled.
Memory Configuration（Memory overclocking function settings）
OverClocking Feature
Turn on or off overclocking settings. Options:Disabled, Enabled. When setto
"Enabled", the following options will appear:
Memory Profile (memory parameter setting)
Set the memory time sequence. Options: Default Profile (default
configuration),XMP Profile1.The full name of XMP is Extreme Memory Profile,
which is a memory overclocking mode proposed by Intel, it stores the
overclocking frequency and parameter settings of memory in the SPD module
of memory through file. BIOS starts XMP, which is to read the overclocking
setting parameter from SPD directly and set the memory frequency.The
following contents can be used as reference for super memory frequency.
Memory Frequency
Set memory frequency.
tCL.
This item controls the delay of C A S, which determines the delay time that
SDRAM begins to read after receiving instructions. (in a time period).
55
ＢＩＯＳ Ｓｅｔｔｉｎｇ
To Next Page
Loading...
