Colorful B365M-PLUS V21 - Page 56

USB Configuration (USB settings)

Legacy USB Support
Set up or close the traditional USB device function. The
traditional USB is the old 1.1USB device, and USB keyboard and
mouse belong to the traditional USB. When using USB keyboard
and mouse, this option needs to be set to "Enabled". Options:
Enabled, Disabled, Auto.
 XHCI Hand-off
This project is used to start the operation system supporting the
function of "XHCI hand-off". Options: Disabled, Enabled.
 USB Mass Storage Driver Support
Set up USB large capacity memory support. Options: Disabled,
Enabled.
 Port 60/64 Emulation
Set up or close the port 60/64 emulation support.Options:
Disabled, Enabled.
CSM Configuration (CSM settings)
 CSM Support
Set up or close the CSM function. The full name of CSM is
"Compatibility support Module", that is compatibility support
module. Options: Disabled, Enabled. Set to "Enabled" to
support interruptions, traditional Option ROM and traditional
non UEFI systems, such as DOS. If set to "Disabled", these
traditional functions will not be supported, and the system will
only support UEFI.
 Option ROM Messages
Specify Option ROM to set display mode. Options:Force BIOS
(BIOS mandatory mode), Keep Current (keep current)
 Boot option filter
Under the premise of setting the CSM Support option to
"Enabled", it is used to set the bootable storage device format
to UEFI or traditional Legacy mode. Options󾗜UEFI and Legacy,
Legacy only, UEFI only.
痲簊 B365M-PLUS V21/BATTLE-AX B365M-PLUS V21
50