Colorful B365M-PLUS V21 - Page 55

 Wake on LAN Enable
Set up network wake-up. Options: Disabled, Enabled.
Super IO Configuration (IO setting)
Click on the "Serial Port Configuration" option, the following
two sub options will appear.
 Serial Port
Start and close the serial port controller. Options: OFF, ON.
 Change Settings (change)
This option is used to change the serial port address.
Hardware Monitor (hardware monitoring)

CPU Temperature
Display the temperature of the current "CPU".
 SYS Temperature
Display the temperature of the current "SYSTEM".
 CFAN Speed
Show the speed of current CPU fan.
 SFAN Speed
Show the speed of current system fan.
 CPU Fan Smart Mode
Set the CPU FAN mode.Options:Full on Mode,Automatic
Mode,Manual Mode.
 SYS Fan Smart Mode
Set the SYS FAN mode.Options:Full on Mode,Automatic
Mode,Manual Mode.
 CPU/DIMM/+12V/5VCC Voltage
The current CPU voltage / memory voltage / +12V/5VCC voltage
is displayed.
49
ＢＩＯＳ Ｓｅｔｔｉｎｇ