5
3.1.2 Configure screen parameter (LCD screen needs no configuration)
1. Open PlayerMaster（Select “LAN” mode if you initially open the software），select the
player under the “USB” tab at the left side of the “Device” page, click the advanced
setting icon
in the bottom-right corner of the interface, and enter the password
“168”.
2. In the “Advanced Settings” interface, click
Screen Parameter
.
3. Click
Save Screen Parameter
and select a correct screen parameter file.
3.1.3 Set screen resolution
In the “Advanced Settings” interface, click
Screen Settings
， enter a screen resolution
(generally enter the actual screen resolution), and click
Apply and Reboot
.
3.1.4 Configure mapping（LCD screen needs no configuration）
1. In the “Advanced Settings” interface, click
Receiver Card Mapping
.
2. Click an add icon , select
Custom
，and enter the width and height of the cabinet.
3. In the painting area, add cabinets according to the combination of the LED screen, and
drag the cabinet frame to change cabinet number.
4. If the mapping automatically generated by the software is inconsistent with the actual
one, click , and right-click the cabinet to clear the mapping, and then hold and press
the left mouse button and move the mouse to set mapping.
You can also select a mapping in the “Fast Mapping” pane.
5. Click
Save
in the bottom-right corner of the interface.
If the LED screen doesn’t display image normally, check if the setting in
Advanced
Settings
>
Control Area
is appropriate; if the LED screen displays image normally, then you
have accomplished screen configuration.
3.2 Select an operation mode
PlayerMaster has two modes: LAN mode, cloud mode. You can publish programs and
schedules to a player and set player parameters in LAN mode or cloud mode. To switch
modes, click
in the upper-right corner of the interface, and select
Software Settings
.
To perform operations on a player in LAN mode, the player and your computer should be
connected to the same local area network. The following are 4 ways to make a control
device and a player connected to the same local area network:
To Next Page
Loading...