Colortac SmartLF Scan! - User Manual

1
.
For SmartLF Scan!
Large Format Scanner
I
nstructions
for
Scan to PC via Network

Summary

Requirements for Network Scanning

Hardware and Software Needs

Specifies the need for a 1GB network connection and NetApp software installation.

Network Configuration Methods

DHCP Connection Setup

Configures the scanner and PC to use DHCP for automatic IP address assignment.

Static IP Address Setup

Manually configure sequential static IP addresses and subnet masks for scanner and PC.

Starting a Scan to PC (Network)

Scan Initiation Process

Instructions on loading a document and selecting scan setup on the scanner display.

Troubleshooting Network Scanning

Recommends restarting the scanner and rebooting the PC if connection issues arise.

Colortac SmartLF Scan! Specifications

General

Interface	USB 2.0
Connectivity	USB
Supported Media Types	Paper, film, vellum
Color Depth	24-bit
Light Source	LED