To Next PageTo Next Page
Need help?Do you have a question about the Columbia 769-03265 and is the answer not in the manual?
Provides contact information and guidance for product assistance.
Explains the meaning of the warning symbol and emphasizes reading safety instructions.
Defines the user's role in ensuring safe operation and following instructions.
Instructions for safe use, understanding, and preparing the machine before operation.
Precautions and guidelines for safely using and storing gasoline.
Key operational guidelines, engine modification warnings, and emissions information.
Details on engine controls, starting procedures, and stopping the engine.
Operation of auger, drive, chute directional, and heated handle controls.
Procedure to test and adjust the auger control for safe operation.
Steps for assembling handles and installing the chute assembly.
Instructions for cable routing, chute control securing, and optional shear pin storage.
Instructions for installing drift cutters for heavy snow conditions.
Adjusting skid shoes, checking tire pressure, and other setup recommendations.
Procedures for adjusting shift cables and chute control for optimal performance.
Adjusting drive control cable and skid shoes for proper operation.
Instructions for engine care and lubricating key components.
Procedures for replacing auger and drive belts and maintaining wheels.
Checking shave plate and inspecting friction wheel for wear or damage.
Solutions for starting problems, erratic running, vibration, and loss of power.
Troubleshooting for propulsion issues and snow discharge failures.
Provides contact information and guidance for product assistance.
Explains the meaning of the warning symbol and emphasizes reading safety instructions.
Defines the user's role in ensuring safe operation and following instructions.
Instructions for safe use, understanding, and preparing the machine before operation.
Precautions and guidelines for safely using and storing gasoline.
Key operational guidelines, engine modification warnings, and emissions information.
Details on engine controls, starting procedures, and stopping the engine.
Operation of auger, drive, chute directional, and heated handle controls.
Procedure to test and adjust the auger control for safe operation.
Steps for assembling handles and installing the chute assembly.
Instructions for cable routing, chute control securing, and optional shear pin storage.
Instructions for installing drift cutters for heavy snow conditions.
Adjusting skid shoes, checking tire pressure, and other setup recommendations.
Procedures for adjusting shift cables and chute control for optimal performance.
Adjusting drive control cable and skid shoes for proper operation.
Instructions for engine care and lubricating key components.
Procedures for replacing auger and drive belts and maintaining wheels.
Checking shave plate and inspecting friction wheel for wear or damage.
Solutions for starting problems, erratic running, vibration, and loss of power.
Troubleshooting for propulsion issues and snow discharge failures.
General| Engine Type | 4-Cycle |
|---|---|
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Starter Type | Recoil |
| Fuel Tank Capacity | 0.5 gallons |
