EasyManua.ls Logo

Colzer AF500 - Warnings

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The AF500 HEPA Air Scrubber is a portable filtration system that removes airborne particles including
mold, pet dander, dust, pollen, drywall dust, and other miscellaneous debris as small as 0.3 microns.
The AF500 utilizes up to 3 stages of filtration including a pre-filter, optional 2nd stage, and a HEPA
filter. The AF500 will create cleaner air in any environment. The pre-filter and second stage filter capture
larger particles and the HEPA filter captures smaller particles.
WARNINGS
Do not move or carry the Air Scrubber while it is operating. When the Air Scrubber is operating, the
powerful airflow can cause unpredictable movement.
NEVER allow children to play with or around the Air Scrubber.
Do not alter or modify your Air Scrubber in any way. Use only replacement parts authorized by
Modifications or use of unauthorized parts could create a hazard and will void your warranty.
Store the Air Scrubber in a clean, dry environment. Do not store outdoors or allow water inside the
units motor. If the motor becomes wet, allow it to thoroughly dry before use.
The Air Scrubber should never be operated near water as it will create a risk of serious injury from
electrical shock.
Handle unit with care to avoid causing damage or injury.
The Air Scrubber should always be operated on a flat surface. Do not operate where unit could fall, or
on slippery surfaces, as this could increase the chance of injury, fire, or electrical shock.
Keep all liquids from being drawn into the Air Scrubber and never operate unit without factory installed
safety inlet and outlet grills in place.
Do not use the Air Scrubber near combustible gas, or hot air as unit could melt and cause a fire or
electrical hazard.
Do not take the Air Scrubber apart or repair it unless you are qualified to do so. Never repair or service
unit while Air Scrubber is plugged in.
Make sure the air intake and outlet are free from all materials and away from obstructions, as any
restrictions may cause the Air Scrubber to overheat and cause a shock or fire hazard.
Unplug the Air Scrubber before performing any service or changing filters.
Do not stack more than 2 units high in order to avoid a tipping hazard – falling equipment can cause
bodily harm.

Related product manuals