EasyManuals Logo
Home>ComAp>Thermostat>Smart Home

ComAp Smart Home User Manual

ComAp Smart Home
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
4 5
3x AAA batteries
19.5
COMPATIBILITY
INSTALLATION
The new smart thermostat solution from COMAP is compatible
with most heating systems.
On/O
contact
Control
wire
Gas heating
Oil heating
Wood heating
Heat pump
Electric heating (dry contact)
Electric heating (control wire)
Check your compatibility at www.comapsmarthome.com
CONTENTS OF THE PACKAGE
Screws and dowels
1x thermostat
1x RJ45 cable
1x USB cable
1x heating module 1x gateway
The thermostat
is attached to the
wall in a living area
(e.g. the living room)
The three devices communicate with each other via radio waves (868MHz). The maximum
distance between the gateway, the module(s) and the thermostat depends on the structure
of your home (thickness of walls and building materials used) and the radio environment
(presence of high-voltage power lines, overhead wires, devices that transmit radio waves). As
an indication: in a new building in an urban environment, a distance of 30 m can be achieved.
Connect the
gateway
to the modem
The heating module
is connected to the
heating system
1 2 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ComAp Smart Home and is the answer not in the manual?

ComAp Smart Home Specifications

General IconGeneral
BrandComAp
ModelSmart Home
CategoryThermostat
LanguageEnglish