Stroller with Seat Cushion
1. Locate the stroller buckle.
2. Pull the stroller buckle from the storage position.
3. Attach belt from seat cushion to hook on stroller
frame. Attachment will be confirmed with an audible
“click”.
4. Attach hook and snap from seat cushion to attach-
ments on stroller frame.
5, Route the buckle through lower center slot in the seat
cushion.
6. Route waist belt from #3, through the twin waist belt
loops. Reattach buckle tongues to both sides of waist
belt and insert into buckle.
7. Attach snaps from seat cushion to snaps on edge of
seat base.
1
2
5
Page 7
3
6 7
4
To Next Page
