Combi Urban - Stroller Assembly and Setup; Opening the Stroller; Attaching Rear Wheels; Attaching & Removing Front Swivel Wheels

- 3 -
1. Stand behind the stroller.
2. Locate the small open
-
ing on each rear wheel
assembly.
3. Locate the small silver pin on each rear stroller leg.
Attaching the Rear Wheels
4. Insert the leg into the
wheel assembly until the
small silver pin locks into
the opening.
Opening the Stroller
1. Release latch by pulling
it up.
2. Grip the handle on each side
with an underhand hold and turn
outward to open.
3. Lift up the handle and
snap the stroller away from
you. It will open and lock
automatically into position.
Attaching & Removing the Front Swivel Wheels
Place front swivel wheel
assembly on the swivel
shaft. The assembly is
secure when it locks onto
the shaft.
Removing the Swivel Wheels
Press in the square button
located at the bottom of the
wheel holder while pulling the
assembly off of the swivel
shaft.
Release Button