Comcast Security Keypad User Manual

Security Keypad
Quick Start Guide
XFINITY HOME
SECURITY • CONTROL • ENERGY
Device Overview
Getting Started
Powering Up and Pairing
1. Remove the keypad and keypad battery door
from box. (Important: The battery door must
be mounted to wall before you snap keypad to
battery door)
2. Set your touch screen to pairing mode and then
pull the “Remove to Pair” tab to put device into
pairing mode.
3. The keypad should start the joining process
automatically. When the keypad is not joined
to a network, the network indicator will be off.
Once it is joined, the network icon will become
solid anytime that the keypad is awake.
Once the keypad has successfully joined the
network, the pairing LED will turn solid, the
network indicator will turn on, and the touch
screen should indicate that it has paired with
the keypad.
Battery Compartment
Low Battery
Network Indicator
Status LED/Proximity Sensor
Pairing/Tamper Button

Comcast Security Keypad Specifications

General

Brand	Comcast
Model	Security Keypad
Category	Keypad
Language	English

Summary

Device Overview

Keypad Components

Overview of the keypad's physical components including battery compartment, buttons, and indicators.

Getting Started

Powering Up and Pairing

Instructions for removing the keypad and battery door, initiating pairing mode, and understanding the network status indicators during the joining process.

Installation and Status

Mounting the Keypad

Instructions for attaching the keypad battery door to the wall using screws and anchors, then snapping the keypad onto the door.

System Status LED

Explanation of the system status LED colors: Green (Ready/Not Armed), Red (Armed), and Amber (Not Ready).

Maintenance and Operation

Replacing Batteries

Steps to check battery level, remove the keypad, replace old batteries with new AA Lithium batteries, and reattach the keypad.

Weekly System Testing

Guidance on performing weekly system tests and contacting the security monitoring company for instructions.

Arming Modes

Instructions for arming the system in Stay, Away, and Night modes using a 4-digit security code.

Keypad Controls

Details on using function buttons, adjusting volume, toggling door chime, and proximity detection features.

Regulatory Information

Approvals and Compliance

Details FCC compliance rules, user warnings about interference, and mentions conformance to UL standards.