Keypad Battery Installation – UEI XHK1-UE
What You’ll Need
• UEI XHK1-UE Keypad
• Four non-rechargeable AA batteries
• Double-sided tape (optional)
How to Install the Batteries
Before proceeding, please be sure that your system is disarmed. Working on devices while the system is armed can
generate false alarms.
Did You Know? You may want to have some double-sided tape on hand if you need to remove your Keypad from the
wall to install a battery. Cut the tape to size and reattach your Keypad if the existing adhesive fails to hold it in place.
Is This Your Keypad? Make sure that your
Keypad looks like the one in the image. If it
does, you have the right document to find out
how to install a battery in your Keypad.
1. Grasp the sides of the keypad and slide it
upwards until it releases from the back
cover.
Take a Look. If batteries are already present,
remove them by gently using your fingertip to
pull one end of the battery up until the battery
is loose. Then, you can it free from the slot.
To Next Page
Need help?
General
