Comelit 6302 User Manual

Assistenza tecnica Italia 0346/750090
Commerciale Italia 0346/750091
Technical service abroad (+39)0346750092
Export department (+39) 0346750093
www.comelitgroup.com
PT
MANUAL
TÉCNICO
IT
MANUALE
TECNICO
EN
TECHNICAL
MANUAL
FR
MANUEL
TECHNIQUE
NL
TECHNISCHE
HANDLEIDING
DE
TECHNISCHES
HANDBUCH
ES
MANUAL
TÉCNICO
1
2
Manuale tecnico Smart kit monofamiliare Art. 8471S
Technical manual for single-family Smart Kit Art. 8471S
Manuel technique Smart kit un usager Art. 8471S
Technische handleiding Smart kit eengezinswoning Art. 8471S
Technisches Handbuch Smart Kit Türsprechanlage
für Einfamilienhaus Art. 8471S
Manual técnico Smart Kit unifamiliar art. 8471S
Manual técnico Smart Kit monofamiliar art. 8471S

Comelit 6302 Specifications

General

Type	Video Intercom
Camera	Yes
Housing Material	ABS Plastic
Handsfree	Yes
Audio	Duplex
Connectivity	2-wire
Mounting	Wall-mounted
Technology	2-wire
Installation	Surface mount

Summary

Programming range/ringtones

Range Address and Enable Settings

Configure minimum/maximum addresses and enable/disable range.

Programming input IN1 for LED/alarm/lock-release/actuator indication

IN1 Input Configuration

Configure IN1 for LED, alarm, lock-release, or actuator functions.

Special Programming - Art. 4882

Lock Functions

Configure door lock and lock-release timings and signals.

System Functions

Configure system functions like reset and call transmission.

General installation and operating instructions

Description of button functions and settings

Default button settings

Programming buttons for generic or coded actuator

Guide to programming button functions for actuators.

Programming for intercom call

Programming/deleting intercom address (selective intercom only)

How to set and remove intercom addresses.

Programming buttons for intercom call

Assigning functions to buttons for intercom calls.

Using IN1 input for LED/alarm/lock-release/actuator indication

Activation on closure towards CFP2

Configure IN1 for activation via closure to CFP2.

Activation in the presence of voltage in relation to IN2

Configure IN1 for activation by voltage relative to IN2.