Need help?Do you have a question about the Comelit 6701W and is the answer not in the manual?
General| Mounting | Wall-mounted |
|---|---|
| Material | Plastic |
| Color | White |
| Display | LCD |
| Type | Handsfree video intercom |
| Technology | 2-wire |
Specifies the intended application of the Comelit product in audio/video communication systems.
Details installation requirements for Comelit products by qualified technical personnel.
Provides guidelines for wiring, including power disconnection and cable routing.
Outlines essential points for ensuring the safe use of Comelit products.
Describes maintenance and repair procedures for Comelit products.
States Comelit Group S.p.A.'s responsibilities and rights regarding the manual.
Explains the connection terminals for system integration, including LL bus and floor door call.
Details the functions of the physical buttons on the door entry monitor.
Explains the meaning of different indicator LED states and flashes.
Describes how to enable/disable functions by pressing and holding specific keys.
Explains the automatic lock-release function activated upon receiving a call.
Describes the self-activation function, typically used for camera view.
Explains how to configure the device as a main or secondary unit in a system.
Presents the default button functions based on S2 DIP-switch settings.
Details the procedure for programming general intercom calls via button configuration.
Explains how to program buttons for selective intercom calls to specific addresses.
Provides steps for assigning a specific address to a device for intercom calls.
Outlines the process for removing a previously assigned selective address.
Describes how to program buttons for generic actuator functions.
Details the button programming for coded actuator functions.
Explains button programming for additional functions like switchboard or self-activation.
To Next Page
