Product Introduction
2
1. Interfaces: including four sockets with the
same definition, used as Fetal Heart Rate
(FHR) socket 1, FHR socket 2, socket of
fetal movement marker sensor and TOCO
socket.
2. Loudspeaker: loudspeaker for fetal
heartbeat.
1. Supporting shaft: to support the display.
2. USB port
3. Network port: for connection to the network.
4. Handle: you can hold the handle to move the
monitor.
5. Power socket: to connect with the power supply
6. Equipotential terminal: to connect with
equipotential connector.
Right View Rear View
To Next Page
Loading...
