COMENDA GE Series User Manual

Ed.09-2021
Bruks- og vedlikeholdsveiledning
Use and maintenance instructions
Istruzioni per l’uso e la manutenzione
GE series
Norwegian execution

COMENDA GE Series Specifications

General

Brand	COMENDA
Model	GE Series
Category	Dishwasher
Language	English

Summary

Declaration of Conformity CE

Information for Users (WEEE)

Technical Data

Control Panel

Foreword

1.1 Operation

1.1.a Switching ON

Instructions for turning on the dishwasher, including initial indicators and detergent addition.

1.1.b Wash cycle selection

Guide to selecting wash cycles based on dish dirtiness using the S9 button and cycle options.

1.1.c Starting the wash cycle

Procedure for starting the wash cycle, including automatic and manual startup modes.

1.1.d Interruption and end of wash cycle

How to momentarily interrupt or end the wash cycle and what happens when turning off the machine.

1.1.e Self cleaning and drain cycle

Instructions for performing the self-cleaning and drain cycle, including filter cleaning.

1.1.f Manual drain

Procedure for manually emptying the tank, including using the overflow pipe or drain pump.

1.1.g Reading the temperature

How to view actual and programmed temperatures for the wash tank and rinse booster.

1.1.h Deactivating the dishwasher at the end of the day

Procedure for turning off the machine at the end of the service, including closing valves.

1.2 Warnings

1.2.a Warnings during operation

Important precautions and advice to follow while the dishwasher is operating.

1.2.b Warning after washing

Steps to follow after washing operations, including cleaning filters and checking jets.

1.3 Advises

1.3.a Important maintenance

Guidelines for essential cleaning and maintenance operations, including safety precautions.

1.3.b Achievements

Checks to perform if washing results are unsatisfactory, focusing on rinsing and detergents.

1.3.c Extended machine stop

Recommendations for machines stopped for extended periods to prevent issues like smells and pump damage.

1.3.d Sanitizing

Importance of regular cleaning and sanitizing, using specific detergents for hygiene.

1.3.e Disencrustation

Procedure for removing lime deposits in hard water areas to maintain machine efficiency.

1.4 Loading and Unloading of the Machine

1.5 Machine Dismantling

2.1 Installation

2.1.a Electrical connection

Detailed instructions for connecting the dishwasher to the power supply, including switch and cable specifications.

2.1.b Water connection

Instructions for connecting the water supply, including pressure, hardness, and temperature requirements.

2.1.c Steam feeding (*)

Guidance on steam feeding connections, pressure range, and steam quality requirements.

2.1.d Water draining

Instructions for installing a water drain at floor level with a siphon and flexible pipe.

2.1.e Steam exhaust (*)

Requirements for the condensed steam exhaust system to ensure proper recovery or blow-by.

2.1.g Self diagnostics: alarms and functions on the display

Explanation of alarm codes and active functions displayed by the machine's self-diagnostic system.

2.1.f Electronic board

2.1.f.1 Standard configuration

Steps to set the switches and load default parameters (P-T-L) for the electronic board.

2.2 Troubleshooting

2.3 Electrical Informations

Contacts