EasyManua.ls Logo

COMENDA EASY:BLUE

COMENDA EASY:BLUE
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EASY:BLUE
MANUAL
Ed. 02/2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the COMENDA EASY:BLUE and is the answer not in the manual?

COMENDA EASY:BLUE Specifications

General IconGeneral
BrandCOMENDA
ModelEASY:BLUE
CategoryDishwasher
LanguageEnglish

Summary

1 GENERAL INFORMATIONS

1.1 MANUFACTURER ASSISTANCE

Details about the manufacturer and assistance provider.

1.2 CERTIFICATION

Lists EU directives the product complies with.

1.3 PURPOSE OF THE MANUAL AND ITS CONTENTS

Explains the manual's goal and scope for users.

1.4 CARE AND STORAGE OF THE MANUAL

Instructions for proper manual handling and storage.

1.5 IMPORTANT SYMBOLS TO REMEMBER

Explains key symbols used in the manual for warnings and indications.

2. CHARACTERISTICS OF THE DEVICE

2.1 RECOMMENDED USE

Details the intended applications and limitations of the EASY:BLUE system.

2.2 PARTS THAT MAKE UP THE MACHINE

Lists components of the machine with a schematic representation.

2.2 COMPONENTS

2.2.1 External pre-filters

Describes the type and placement of external pre-filters.

2.2.2 Membranes

Specifies the type and quantity of membranes used.

2.3 DESCRIPTION

2.4 TECHNICAL SPECIFICATIONS

2.5 GENERAL DIMENSIONS

3 INSTALLATION

CONTROLS TO BE CARRIED OUT BEFORE INSTALLATION

Lists essential checks before beginning the installation process.

3.1 INSTALLING THE WATER TAP

3.2 INSTALLING THE DRAIN BRACKET

3.3 TAP INSTALLATION

4 OPERATING

4.1 FIRST START UP

Steps for initial system startup and checks.

4.2 NORMAL USE

Explains how to operate the machine during regular use.

4.3 BEHAVIOUR IN THE EVENT OF FAILURE

Actions to take in case of water leaks or other failures.

4.4 ELECTRONIC BOARD OPERATING

4.5 INACTIVITYALLARM

4.6 HIGH CONDUCTIVITY ALARM

Details the high conductivity alarm and its resolution.

4.7 REPLACEMENT FILTERS ALARM

Information on filter replacement alerts and reset procedure.

4.8 MINIMUM PRESSURE ALARM

Explains the minimum pressure alarm and its behavior.

4.9 LEAKAGE ALARM

Describes the leakage alarm and actions to take.

4.9 CONFIGURATION MANU

5 ORDINARY MAINTENANCE

5.1 QUALIFICATION OF MAINTENANCE PERSONNEL

Specifies the required qualifications for maintenance staff.

5.2 RESPONSIBILITIES OF MAINTENANCE PERSONNEL

Outlines the duties and adherence required for maintenance.

ITEM TO CHECK

5.3 REPLACING FILTER CARTRIDGE

5.4 VERIFICATION OF THE SETTING

5.4.1 Setting max pressure switch

Instructions to adjust the maximum pressure switch.

5.4.2 Check operating pressure

How to check the machine's operating pressure.

5.4.3 Calibrating conductivity probe

Steps for calibrating the conductivity probe.

5.5 CLEANING CONDUCTIVITY PROBE CONNECTORS

Guide to cleaning the conductivity probe connectors.

5.6 CLEANING SOLENOID VALVES FILTER

5.7 MACHINE SANITATION

6 EXTRAORDINARY MAINTENANCE

6.1 ELECTRONIC BOARD AND DISPLAY REPLACEMENT

Instructions for replacing the electronic board and display.

6.2 PROTECTION FUSE REPLACEMENT

Guide to replacing protective fuses.

6.3 VANE PUMP REPLACEMENT

6.4 CHECKREPLACEMENT OF OSMOTIC MEMBRANES

7 TROUBLE-SHOOTING

8 DISPOSAL

ATTACHMENT I - UE declaration

ATTACHMENT II - SPARE PARTS AND ACCESSORIES LIST MINI-BLUE

ATTACHMENT IV - Maintenance Log

ATTACHMENT V - Electronic board connection

Related product manuals