COMENDA EASY:BLUE User Manual

7596004CM - Manuale EASYBLUE COMENDA ENG ok - 11 -
3.1 INSTALLING THE WATER TAP
Typical installation with ½” MF water tap
Unscrew the ring nut of the cold water flexible.
Using Teflon tape, install the ½” MF fitting.
Reassemble the flexible previously removed.
Using the Teflon tape, install the water tap fitting with a
valve for a 6mm diameter pipe.
Connect the water tap to the machine.
Typical installation with 3/8” water tap
With a screwdriver, unscrew the cover form the wall connection and remove the mesh filter.
Using Teflon tape, install the water tap fitting for 6mm diameter pipe.
Connect the water tap to the machine.
Typical installation with dishwasher water tap
Unscrew the ring nut of the dishwasher flexible pipe.
Install ¾” MF x 3/8”F T fitting on the dishwasher water tap making sure the ¾” rubber
washers are correctly positioned
Using Teflon tape, install the water tap fitting for 6mm diameter pipe.
Connect the water tap to the machine.
Wall attack ½”
fitting ½” MF
Water valve
Cover
Mesh filter
Water valve
Ring nut of the
dishwasher
T ¾” MF x 3/8”F
Water valve

COMENDA EASY:BLUE Specifications

General

Brand	COMENDA
Model	EASY:BLUE
Category	Dishwasher
Language	English