7596004CM - Manuale EASYBLUE COMENDA ENG ok - 4 -
1 GENERAL INFORMATIONS
1.1. MANUFACTURER / ASSISTANCE
COMENDA-ALI GROUP
Cassina De’ Pecchi (MI)
Personal Data of the Retail Seller
1.2. CERTIFICATION
EASY:BLUE was manufactured in compliance with the following EU Directives:
Machines 2006/42/UE
Low Voltage 2014/35/UE
Electromagnetic Compliance 2014/30/UE
RoHS2 2011/65/UE
Each system is equipped with a mixing system of the network water with the treated one in order to maintain the
conditions to the point of use.
The machine is equipped with anti-leakage system and all parts in contact with water intended to be ingested or
assimilated are in compliance with the requirements for those elements that are in the food regulations.
1.3. PURPOSE OF THE MANUAL AND ITS CONTENTS
This manual was written in order to supply the user with all necessary information needed to facilitate the
autonomous and safe operation on this device. The manual contains information relating to operation and regular
maintenance of the machine.
This manual is addressed both to the users, for the parties expressly stated, and to the
technicians qualified for maintenance of the machine.
Before carrying out any work on the machine, both users and installers and qualified
technicians should read carefully the instructions contained in this manual.
Users can only perform the operations described in this manual and they have not to perform
tasks reserved to maintenance or qualified technician.
This equipment requires regular maintenance to ensure treated water potability.
All extraordinary maintenance operations must be done by qualified personnel only.
1.4 CARE AND STORAGE OF THE MANUAL
This instruction manual is an integral part of the device and it must be kept nearby at all times, and stored inside a
proper container so that it is protected from eventual damage or destruction.
1.5 IMPORTANT SYMBOLS TO REMEMBER
This symbol indicates a warning or a note about key functions or useful information. Please pay
close attention whenever you see this symbol.
This symbol indicates that specialized/portable equipment may be required to adjust or repair the
components of the device.
This symbol indicates that detecting a measured value, controlling a signal, performing a visual
check (etc...), on the device, may be required.
This symbol indicates General cautions; risk for the operator.
This symbol indicates danger of electrical shock or electrocution.
This symbol indicates prohibition.
To Next Page
Loading...
Need help?
General
