23
SECTION RESERVED FOR USE BY SKILLED TECHNICIANS
« CAUTION
• This part of the manual is only for use by Skilled Technicians and is not meant to be used by the
end user of the pump.
9. UNPACKING
« CAUTION
• Protective gloves and goggles must be worn when removing the appliance from the packing
materials to prevent injury to the hands and eyes.
• The packing materials (plastic bags, staples etc.) must not be left in reach of children, as they are
potentially dangerous.
• The packing materials must be disposed of according to current regulations in the country where
the pump is installed.
In particular, plastic bags and packaging must never be abandoned, as they are harmful to the
environment.
• After removing the pump from the packing materials, check that no parts are missing and check
that the identication label is present and is legible.
In case of doubt, do not use the pump in any circumstances and contact the dealer.
• This operating manual must always accompany the pump and should be given to the end user.
10. INSTALLATION
« CAUTION
• The Skilled Technician must follow the instructions for installation in this manual; in particular,
the specications of the internal combustion engine to be used in conjunction with the pump must
comply with the performance and the construction features of the pump (power, rotation speed,
anging, etc.) as illustrated in the technical documentation provided by the Manufacturer.
• The machine that incorporates the pump must be constructed so that it guarantees compliance
with safety regulations laid down by European Directives. This is guaranteed if the CE mark is
present and by the Declaration of Conformity issued by the Manufacturer of the machine that
incorporates the pump.
• The drain for the thermal trip valve (12) must be arranged so it cannot cause any hazardous
situations.
• Horizontal axis pumps must be installed and operate in a horizontal position. Vertical axis pumps
in a vertical position
• The pump must be secured so that it is stable.
10.1 APPLICATIONS
« CAUTION
• Protect moving parts with appropriate protection devices
• The pump must not operate at a speed of rotation above that illustrated on its label (also refer to
the “FEATURES AND TECHNICAL SPECIFICATIONS” section).
• The pump must be securely fastened to the engine ange.
Always contact the dealer or the Manufacturer to identify the correct application.
To Next Page
Loading...
Need help?
General
