STD = Standard
VA = Version available
AP = Through Shaft Version
(1) = Available with appropriate kit
(2) = Pulley available: 2 channels A Øp 172; 2 channels A Øp 247; 2 channels A Øp 292
(3) = Reducer available: 1:6.44; 1:8.89; 1:5.09; 1:1.66; 1:2.5
(4) = Contact the dealer or Manufacturer for information on the correct kit to be used
(5) = Reducer available: 1:6.44; 1:5.09; 1:1.66; 1:2.5
(6) = Pulley available: 2 channels A Øp 247; 2 channels A Øp 292; 3 channels A Øp 292; 3 channels A Øp 350
(7) = Reducer available: 1:6.44; 1:5.09; 1:1.66; 1:2.5; 1:4.33
(8) = Reducer available: 1:6.44; 1:5.09; 1:4.33
(9) = Pulley available: 3 channels A Øp 292; 3 channels A Øp 350
(10) = Pulley available: 3 channels A Øp 292; 3 channels A Øp 350; 3 channels B Øp 290
(11) = Reducer available: 1:4.33
(12) = Pulley available: 3 channels A Øp 350; 3 channels B Øp 292
(13) = Reducer available: 1:3; 1:4.28; 1:5.45; 1:7.5
(14) = Reducer available: 1:3; 1:3.75; 1:4.28; 1:5.45; 1:7.5
(15) = Reducer available: 1:3; 1:3.75; 1:4.28; 1:5.45; 1:6; 1:7.5
Through shaft 1” 3/8M Cardan
1” 3/8M Cardan
Non-through shaft with 6 holes
Non-through shaft with 6 holes
and 1” 3/8F Cardan
Through shaft 1” 3/8M Cardan
6 holes and 1” 3/8F Cardan
Through shaft 25mm Ø cone
shaped– 6 holes
Non-through shaft 1” 3/8
male Cardan
Non-through shaft cylindrical
30mm Ø
Through shaft 1”3/8M Cardan
cylindrical 30mm Ø
Through shaft 1” 3/8M Cardan
6 holes
Non-through shaft cylindrical 1”
Through shaft 1” 3/8M Cardan
cylindrical 1”
Through shaft 1” 3/8M Cardan
1” 3/8F Cardan
Quick coupling 1” 3/8F Cardan
Pulley
Hydraulic motor SAE flange
with two holes
Hydraulic pump group 2
Reducer
Overdrive
F
langes for agricultural machinery