What to do if the Comet Iron pump cannot run?
If the Comet Iron pump isn't running, several issues could be the cause. First, ensure the water tank is filled. If the tank has water, the pump itself may need to be replaced. Alternatively, the water solenoid valve might be faulty and require replacement. Also, check and clean the water level probe; if necessary, replace it.
Why does the safety valve on my Comet Iron open repeatedly?
If the safety valve on your Comet Iron opens repeatedly, it could be due to several reasons. Begin by cleaning the boiler water level probe. If the issue persists, consider replacing the probe, the pressure switch, and ensure the connection copper tube is free from any blockages. You might also need to replace the resistance contactor or the safety valve itself.
How to troubleshoot a Comet Iron when the generator pressure does not increase?
If the generator pressure in your Comet Iron isn't increasing, check the resistance contactor. Also, check the pressure switch and the resistance. Ensure that the temperature is at least 133°C. Finally, perform a general check.
Describes the intended use for cleaning and disinfecting, and unauthorized uses.
Provides instructions for safely handling and transporting the steam generator.
Steps for unpacking, lifting, and positioning the steam generator correctly.
Guidance on inspecting the machine and its components upon receipt.
Instructions for connecting the power cord and performing initial cleaning.
Details the main switch, pilot light, display, and boiler/gun start buttons.
Explains how to connect and use the steam gun.
Step-by-step guide to starting the steam generator.
Procedures for draining the water tank safely.
Instructions for releasing steam pressure from the boiler.
Safety measures to take before performing any maintenance on the machine.
Guidelines for performing visual checks on the machine and its parts.
How to clean the machine's exterior and remove dust.
Steps to follow before restarting the machine after a period of inactivity.
Lists maintenance tasks reserved exclusively for qualified technicians.
Refers to a troubleshooting table for identifying and resolving potential issues.
General| Brand | Comet |
|---|---|
| Model | Professional Series |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
