Pull down on the white ring
to divide the adaptor into
two parts.
Top part: Faucet fitting
Bottom part: Hose fitting
Rubber gasket
Inner threads for outer threaded faucet.
Outer threads for inner threaded faucet
2.Connect the ends of the water supply hoses to the
faucets. For convenience, use the Quick Connection
for connection to the cold water faucet. See instructions
Connection Adaptor use in Step 1 above.
COLD
Adaptor
for
Quick
Cold
NOTE:
When connected to a single faucet, be sure to only run cold water washers.
To Next Page
Loading...
Need help?
General
