How to activate all massage regions on my Comfier CF-3001S?
If the massage is not active in all regions of your Comfier Massager, the massage motor for that region may have been switched off. Press the button that corresponds to that region to activate it.
Why does my Comfier CF-3001S Massager switch off suddenly?
Your Comfier Massager might be switching off for a couple of reasons. First, the timer may have run out; to continue, simply press the ‘Power’ button. Alternatively, the over-heat protection function may have been activated. If this is the case, please allow the device to rest for 15-30 minutes before restarting it.
What to do if Comfier CF-3001S fails to start?
If your Comfier Massager fails to start, consider the following: * If the device has been used for more than 30 minutes, let it rest for 15 minutes before continuing. * Ensure the adapter is properly plugged into the socket. * Verify that the adapter output is correctly connected to the device's power inlet wire. * In warmer environments, the device may require a longer cooling period.
General| Model Number | CF-3001S |
|---|---|
| Heat Function | Yes |
| Massage Modes | 3 |
| Power Source | AC Adapter |
| Massage Area | Neck, Shoulders, Back |
| Massage Nodes | 8 |
| Adjustable Intensity Levels | 3 |
| Cord Length | 6 feet |
| Material | PU Leather |
| Features | Heat |
| Type | Shiatsu Neck and Shoulder Massager |
To Next Page
