What to do if my Comfier CF-1902C Massager device switches off suddenly?
Your Comfier Massager may have switched off suddenly because it has been in use for 15 minutes. To continue, rest the unit for 15 minutes, then press the power button. It could also be due to the over-heat protection function being activated. In this case, please rest the device for 15-30 minutes before restarting.
What to do if my Comfier Massager fails to start?
If your Comfier Massager fails to start, it may be because the device has been used for more than 15 minutes. Allow the device to rest for 15 minutes before continuing. Another reason could be a low battery, so please charge it. Also, ensure the adapter is plugged into the socket and the adapter output is connected to the device power inlet wire.
Why are the infra-red lights on my Comfier CF-1902C on but there is no motion from massage heads?
If the infra-red lights are on but the massage heads aren't moving on your Comfier Massager, the device may be jammed. Remove any pressure or load from the device and press the power button to try again.
To Next Page
General
