6
Care and Cleaning Instrucons
TROUBLESHOOTING GUIDE
1. Do not wash in washing machine or immerse the product or the adapter in water.
2. Always switch off before cleaning and remove the adapter from the socket with clean, dry hands.
3. The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe
the product with alcohol or harsh chemicals such as thinner or bleach.
4. Keep away from heat, fire or exposure to direct sunlight.
5. Do not apply excessive pressure or impact onto massager/massage heads. Applicaon of a
direct force in excess of 110 lbs. may damage your massager and invalidate your warranty.
Refrain from over usage of the device.
6. Store the massager in a cool, dry place out of reach of children.
7. Avoid contact with sharp edges or pointed objects which might cut or puncture the cover
of massager.
Massage heads rotang at
reduced speed.
Fault Solutions
The load on the massage heads is excessive. Reduce
load and try again.
Device switches off suddenly
Jerky moon of massage heads /
Vibraons from device
Excessive pressure may have been applied onto the
device. Reduce the load and try again.
Device may be jammed. Remove pressure / load
from the device and press the ‘Power’ buon to try
again.
Infra-red lights are on but no
moon from massage heads
Device may have been in use for 15mins. Auto-shut-
off funcon acvated. Connue using by pressing the
‘power’ buon aer resng the unit for 15mins.
Over-heat protecon funcon acvated. Device is
switched off for your safety. Please rest device for 15-
30mins before restarng.
The baery is low,please charge in me.
Check if adapter is plugged into socket and adapter
output is connected to device power inlet wire .
Check if device has been used for more than 15mins.
If so, let device rest for 15mins before connuing.
Device may require longer me to cool in warmer
environments.
Device fail to start