To Next PageTo Next PageHow to fix a COMFORT-AIRE Air Conditioner that won't start?
If your COMFORT-AIRE Air Conditioner isn't starting, first ensure it's properly plugged into the wall outlet. If it is, check your house fuse or circuit breaker and replace the fuse or reset the breaker if necessary. Also, check the Plug Current Device and press the RESET button. Finally, make sure the power switch is turned ON.
Why is my COMFORT-AIRE Air Conditioner cooling, but the room is still too warm?
If your COMFORT-AIRE Air Conditioner is cooling but the room remains too warm, and there's no ice forming on the cooling coil, several factors could be at play. Start by cleaning the air filter, as a dirty filter restricts airflow. Ensure the temperature isn't set too high; try lowering it. Adjust the air directional louvers for better air distribution, and clear any blockages like drapes or furniture from the front of the unit. Also, close any open doors, windows, or registers. If you've just turned the unit on in a hot room, allow extra time for it to remove stored heat from the walls, ceiling, floor, and furniture.
General| Brand | COMFORT-AIRE |
|---|---|
| Model | RADS-101P |
| Type | Portable Air Conditioner |
| Cooling Capacity | 10, 000 BTU |
| Refrigerant | R410A |
| Power Supply | 115V/60Hz |
| Operating Modes | Cool, Fan |
| Included Accessories | Remote Control, Window Kit |
Explains how to use the manual and the meaning of warning and caution symbols.
Covers proper plug usage, grounding, circuit breakers, and cord handling.
Details safe usage, environment conditions, and preventing damage to the unit.
Addresses precautions for users, children, and environmental factors like storms.
Details electrical requirements, grounding importance, and receptacle needs.
Explains the function and testing of the power supply cord's current detection device.
Specifies recommended outdoor and indoor temperature ranges for cooling and heating operations.
Covers pre-installation checks, measurements, and general preparation for window mounting.
Step-by-step guide to remove the unit's chassis for installation.
Lists hardware and tools required for window mounting installation.
Instructions for attaching structural components to the cabinet for window mounting.
Steps for assembling and fitting the side filler panels into the unit.
Guidance on positioning the unit within the window opening.
Instructions for installing support brackets to secure the unit at the sill.
Steps to adjust and secure the filler panels to seal the window opening.
Securing the top angle bracket to the window frame for stability.
Applying seals and safety locks for window security and weatherproofing.
Reassembling the unit by installing the chassis and front panel.
Instructions for installing insulation hardware for energy star models.
Applying weather stripping to minimize air leaks around the unit.
Guidelines for choosing a suitable wall location for thru-the-wall installation.
Steps for measuring and cutting the wall opening for the unit.
Instructions for constructing a wooden frame to fit the wall opening.
Procedures for sliding the chassis, positioning the cabinet, and securing it.
Steps for installing the unit in a masonry wall, including frame and support brackets.
Describes typical sounds like rushing air, gurgling, high-pitched chatter, vibration, and pinging.
A note stating illustrations are for explanation and actual shape may differ.
Explanation of control panel buttons for turning unit on/off and changing settings.
How to adjust the desired temperature using UP/DOWN buttons.
Description of the ion generator feature for air purification.
How to select fan speeds: Auto, Low, Med, High.
How to activate and use the sleep mode for gradual temperature changes.
Explanation of the filter check indicator and how to reset it.
Details the energy saver function and its impact on fan and compressor operation.
Using the remote as a thermostat for precise temperature control at its location.
How to set automatic start and stop times for the unit.
Explains unit displays, error codes, and basic troubleshooting for sensor errors.
How to adjust the 4-way air directional louvers for optimal airflow.
Provides tips on compressor delay, temperature display conversion, and fresh air vent control.
Emphasizes unplugging the unit before cleaning to prevent shock or fire hazards.
Step-by-step guide on how to remove, wash, or vacuum the air filter.
How to clean the unit's cabinet and front panel using appropriate methods.
Recommendations for storing the unit during the winter season.
Solutions for common issues when the air conditioner fails to start.
Troubleshooting steps for when the unit's cooling is insufficient or not cold enough.
Addresses problems like room warmth despite cooling, rapid on/off cycles, and operational noise.
Solutions for water leaks and problems with remote sensing functionality.
Troubleshooting tips for when the room becomes too cold.
Outlines the one-year parts and labor, and five-year sealed system warranty.
Lists what is not covered by the warranty and conditions for coverage.
Explains warranty limitations, implied warranties, and consequential damages.
Instructions on how to contact for warranty service or parts. Includes contact information.
Section for recording purchase details like model, serial number, and installation date.
