Comfort Plus Adjustable Bed - Using the Memory Functions

1
CORDLESS HANDSET OPERATION
S1
S2
S3
S7
S8
S9
S10
S11
S12
S14
S4
S5
S6
S13
- Memory feature
3 memory options
that you can set
to suit you
- For using a bed side table lamp
(Optional)
- Underbed lighting strip function
- Lowers the head end and foot end
together
- Raises the head end and foot end
together
- Lowers head only
- Raises head end only
- Lowers footend only
- Raises foot end only
- Iluminates light feature on handset
- Handset light
S1
S4
S5
S6
S2
S3
S7
S8
S9
S10
S11
S12
S13
S14
7
Your bed comes with 3 memory options, you can store 3 positions that you
prefer and at the touch of either buttons 1, 2 or 3, your bed will move to this
position automatically. To use this feature firstly put the bed in a comfortable
position that you wish to store to memory. Next, push the S button 3 times,
you then have 4 seconds to choose and press either S4, S5 or S6.
Once pressed you will hear a beep from the motor and the light on the
handset (S14) will illuminate. Then whenever you press the corresponding
button, the bed will automatically move to the stored position. Please note
that whenever you change a stored position, the bed can only remember the
last position stored.
USING THE MEMORY FUNCTIONS
}