Need help?Do you have a question about the Comica LinkFlex AD3 and is the answer not in the manual?
Labeled diagram identifying all physical components and connection ports of the audio interface.
Step-by-step guide for installing the 9V battery, ensuring correct polarity.
Instructions on using the belt clamp and magic-tape for secure device mounting.
How to connect XLR, 3.5mm, and 6.35mm audio sources to the device inputs.
Visual guide for connecting microphones and output devices like cameras and smartphones.
Adjusting input gain levels and configuring audio monitoring modes.
Selecting mono/stereo output, device output mode, and phantom power settings.
General| Input | 3.5mm TRS |
|---|---|
| Output | 3.5mm TRS |
| Frequency Response | 20Hz - 20kHz |
| THD+N | < 0.1% |
| Total Harmonic Distortion | < 0.1% |
| Signal-to-Noise Ratio | > 100dB |
| Weight | Approx. 100g |
| Charging Time | 2 hours |
| Power Supply | USB Rechargeable |
| Operating Range | Up to 100 meters |
| Compatibility | Smartphones, Cameras, PCs |
To Next Page
