Secure motor kit to baserail by installing (2) screws provided.
10.
Test motor kit on baserail to confirm it is
functioning properly.
11.
Installation Instructions
Slide housing back onto baserail & push pad. Make sure the baserail & the black push pad guides are in the
correct channel.
13.
US customer support 1-888-622-2377 | www.commandaccess.com | CA customer support 1-855-823-3002
Re-install push pad onto baserail.
12.
Re-install (2) screws into mounting bracket & housing.
14.
To Next Page
Loading...