To Next PageTo Next Page
Need help?Do you have a question about the Commax CAV-705U and is the answer not in the manual?
General| Type | Video Intercom |
|---|---|
| Display Size | 7 inches |
| Display | TFT LCD |
| Resolution | 800 x 480 |
| Communication Type | Wired |
| Mounting Type | Wall mount |
| Wiring | 4-wire |
| Operating Temperature | -10°C to 50°C |
| Weight | 1.2 kg |
| Camera Sensor | CMOS |
| Power Source | AC |
| Power Supply | AC 100-240V, 50/60Hz |
| Audio | Two-way communication |
Setting building and room number for household identification.
Setting a personal identification number for household access.
Setting extension numbers for sub-phones or internal communication.
Enabling various functions like security sensors and lights off for away mode.
Configuring delay times for security sensor activation and deactivation.
How to monitor doors, initiate/end conversations, and open doors.
Steps for receiving and communicating with visitors at the entrance.
Adjusting receiving and call sound volumes for better communication.
How to initiate calls to and talk with the guard station.
How to receive and talk with the guard station when they call.
Adjusting receiving sound volume during conversations with the guard station.
Procedure to activate the emergency signal using the dedicated button.
How to stop the emergency signal and check circumstances.
Returning to standby status after emergency release.
How to register numbers and place telephone calls.
How to register extensions and make calls to them.
How to register neighbors and make calls to them.
Adjusting audio volumes for calls and reception.
Using the control pad to adjust volumes for various functions.
Specific controls for lobby, telephone, guard, individual door, neighbor, call, extension, and touch/ring tone.
Operating individual lights or all lights via the EMS system.
Displaying and checking the status of lights in assigned rooms.
Displaying the current status (open/closed) of gas valves.
How to individually close specific gas valves.
Displaying current and desired room temperatures for boiler control.
Adjusting desired temperatures using up/down buttons.
Checking real-time usage data for water, gas, electricity, hot water, and heat.
Handling fire alarm signals and deactivation procedures.
Handling gas alarm signals and deactivation procedures.
Managing alarms related to fire ladder usage and deactivation.
How to deactivate security functions after setting.
Restoring security functions after an alarm.
Setting up the away mode with delay times and activation.
Releasing the away mode and informing the guard station.
Visual representation of all product connections and pin assignments.
Guidelines for correct wiring polarity and product registration.
Procedures for assigning IDs and installing slave phones.
Instructions for connecting the emergency switch.
How to connect the fire ladder lead switch.
Guidelines for connecting fire and gas alarm sensors.
Instructions for connecting burglar sensors.
Wiring specifications for guard stations and door cameras.
Connecting lobby cameras and slave phones, including video signal and power.
Troubleshooting steps to perform before contacting customer service.
Procedures for contacting support and when to seek professional service.
Basic maintenance guidelines for the unit.
Contact information for customer service and repair.
Guidelines for using manufacturer-specified replacement parts.
