EasyManua.ls Logo

Commax CAV-70PG - Operating; Call from the individual entrance; Call from the Lobby; Conversation with the guard station

Commax CAV-70PG
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Call from the individual entrance
When the visitor presses the call button, an electronic chime sound rings and
the visitor’s image appears on the monitor.
Conversation with the individual entrance will begin when you presses the call
button. To release the door lock, press the door release button. (Only in case of
using the screen turned on, open& shut can be used)
When you receive the call from Lobby or Guard Station during the conversation
with the individual entrance, the electronic chime sound rings. Then, press the
talk button to end the call with a guard station and press the call button again to
begin the conversation with a visitor.
Screen will be turned off after 60 sec automatically, press the monitoring button
to check again.
When press the talk button after the end of talking with a visitor, screen is turned
off and all is done.
2. Call from the Lobby
Visitor’s image will be shown on the monitor with emitting chime sound when a
visitor presses the call button.
Press the talk button by watching visitor and talk with a visitor. (Screen will be
turned off after 60 sec automatically from the beginning of conversation)
When you receive the call from Lobby or Guard Station during the conversation
with the individual entrance, the electronic chime sound rings. Then, press the
monitoring button from the video phone to finish the conversation with lobby and
have a conversation with visitor.
When you press the door release button in the middle of conversation, the lobby
gate will be opened with switchgear sound and the conversation will be finished.
3. Conversation with the guard station
(1) Call from the guard.
The sound of call will be emitted when it has a call from guard.
Press the talk button to begin the conversation.
While talking over the phone with the guard station, lower call sound of
monitoring will be emitted. Then, press the monitoring button from the video
phone to finish the conversation with lobby and have a conversation with
visitor
4. Operating
5

Related product manuals