1. Press [Start] button. 2. Enter password.
0 1 2 3 4 5 *
Beep
Press [Start] button from
the outdoor handle.
Enter registered password when LED light is on.
3.Press [Start] button.
0 1 2 3 4 5 *
Beep
Press [Start] button twice in a row, press [0] and open the battery cover
of the indoor main part and press [Register] button, and 3D touch
setting/delete will be changed.
- Setting alarm : Beeeeeep
- Delete alarm : Beep
[Register]
Press [start] button 2 times
Beep
How to Register/Delete 3D Touch
1. It is to strengthen the security of password.
When registering/ authentication a password,
pressing the number for a second or longer will
set the number to a virtual number instead of the
original number.
(Ex. When you press [1] for a long time : it indicates
virtual number, not 1.)
2. Combined with the imaginary function of this
product, password security will be much strengthened.
3. You can set each number and check by the blinking
of the lamp when you press the button more than a second.
4. 3D Touch mode is not set when it is in factory reset mode.
Note
1. When 3D touch mode is deleted, the password is
reset to ‘1234’.
2. Recognized as normal number mode in case of
master registration/deletion, fire/mischief.
Warning
* What is imaginary function?
Function to open a door even if random number is
entered with the actual password.
Ex) Password “1234”
* Enter imaginary and password
- 5231234, 1234253, 45123402
* Even entered as above, the door opens
Note
To Next Page
Loading...
Need help?
General
