6
2.Door release card registration/deletion
1) Card registration
(1) On tagging the master card for registration, LED slowly flickers with beep sound.
(Entering registration mode)
(2) Be
ep sound comes out when door release card is tagged.
(3) In case more than 1 cards have to be registered, repeat above (2) procedure.
(4) In case you finish registration, please tag the master card or registered door
release card.
2)
Indiv
idual Card deletion
(
1) LED flickers fa
st on
tagging master card for deletion.
(Entering Pre-Deletion mode).
(2) Press button 3. Then beep sound comes out.
(Entering Individual deletion mode)
(3) In case more than 1 cards have to be deleted, repeat above (2) procedure.
(4) In case you finish deletion, please tag the master card.
3) All cards deletion
(1) Tagging the master card (for deletion) 3 times in 4 seconds, LED flickers fast
with beep sound. (Entering Pre-
Deletion mode).
(2) If you tag master card for deletion once more in 4 seconds, the beep sound
stops and all card information is processed.
(3) When all card information is deleted, LED light flickering will be stopped after
beep sound.
* Remark : Maximum 2,046 cards can be registered. (including 2 master cards)
Do not turn off the device until all cards deletion process is completed.
* Precautions
- Other than the RF card provided by COMMAX, the recognition sensitivity may be
degraded or it may not work.
(Please use the RF card provided by COMMAX because it may ca
use security
problems.)
To Next Page
Loading...
Need help?
General
