5
2.
How to use
2-1 Function
1.The power supply of this product is DC12V.
2. If the household videophone is answered when you call from this door
c
amera(entrance), you can talk with
household.
3.Please note that 3-way communication is possible when another user turn on the
monitor when you are talking with
visitor at the entrance.
4.Please note that 3-way communication is possible when you call a house and then
call to other house in a row.
5.This product supports 2 ports for OPEN contact so that CDV-70KR3/70AR3
videophone can be connected.
6.If you want to open the door using a RF card key, please tag it to CARD point.
7.You cannot use a RF card, when you talk with household or any household is
monitoring.
8.Extension panel (DRC-24XM(F)) can be connected up to 1 unit.
2-2 How to register/delete RF card
* Button type
Button 1 : to register RF master card only for
registration of other RF cards Button 2 : to register
RF master card only for deletion of other RF cards
1. How to register Master Card
1)
Master card for Registration
(1) LED slowly flickers with beep sound on pressing button 1.
(2) Tag the master card for registration on LED flickering.
(3) If registered normally, LED flickering and beep sound stops.
2)
Master card for Deletion
(1) LED flickers fast with beep bound on pressing button 2.
(2) Tag the master card for deletion on LED flickering.
(3) If registered normally, LED flickering and beep sound stops.
* Remark : Master card can be registered both registration/deletion purpose.
(1card for each purpose only) In case of new mater card registration, the previous
master card information will be deleted and new card should be registered.
To Next Page
Loading...
Need help?
General
