6
4.
GUI Description
3 ..
(stand-by mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 ( Camera 2 ) OFF Camera 1 ............
(On talking mode)Operation
- By pressing Monitor button repeatedly, the monitor will work as following in order.
Camera1 ( Camera 2 ) Camera 1 ( Camera 2 ) ............
Monitoring : function to see the image of visitor in the entrance.
6 7
3) Delete individual RF cards
①
Press program number (4) and press OK button (E)
② Enter the password and press the OK button (E).
③ When individual deletion mode is successfully entered, the KEY LED will blink.
④ Tag the card to be deleted to the RF receiver.
If you tag another card continuously, you can delete multiple cards at once.
⑤ Press the Cancel button (C) and the KEY LED stops blinking and individual deletion
is completed.
4) Delete all RF cards
① Press program number (5) and press OK button (E)
② Enter the password and press the OK button (E).
③ When all deletion mode is successfully entered, the KEY LED will blink.
④ Press and hold the OK button (E) for 2 seconds, the whole deletion will proceed
with the beep sound.
⑤ When the whole deletion is completed, beep sound and KEY LED will stop..
To Next Page
Loading...
Need help?
General
